CHOKES: So many types.. M.V. and Actinic Chokes / Ballasts: a selection..........

OPTIMA MV 50W 243V £19.95 - £5.00
Helvar 50W/80W 230V £29.95 - £5.00
PARMAR MV 125W 230V - Enquire
VOSSLOH MV 80/125W - £39.95 - £5.00
Choke MV 250W 230V £39.95 - £5.00
PARMAR MV 400W 230V - Enquire

SCHWABE Actinic 4-8W £4.95 - £3.40
TRIDONIC Actinic 15W £9.95 - £3.40
TRIDONIC Actinic 18-22W £9.95 - £3.40
TRIDONIC Actinic 30, 40W £9.95 - £3.40

POSTAGE: Chokes are heavy !  Carriage charge is in red against each choke. Ask for carriage quote and discounts on multiple orders !  A wide range of other chokes available, Mercury, Metal-Halide, Actinic, Fluorescent, Elec

STARTER Holders:
Each: £1.95
With Starter £2.70
Per 10 £17.00

STARTERS: 4-65W
Each:  £0.75
Pack of 10: £6.00

T5, T8 END CAPS:
For straight tubes
T5 - £ 2.00 per pair
T8 - £ 2.50 per pair

END CAPS - Rainproof - Arcadia ultraseal with 2m leads. Available as T8 or T5 Price £20.00 per pair or set.

TUBE CLIPS: Spring Steel Zinc plated.
¾" for T5 tubes: 80p per pair. £3.50 per 10.
1" for T8 tubes: 95p per pair. £4.00 per 10.
1½" for T12 tubes: £2.00 per pair £9.00 per 10

POWER FACTOR CORRECTION Capacitors:
Reduces power consumption / heat by 30 - 50%
450V DUCATI Series for Mercury Vapour etc.
4uF - £2.95 | 6uF - £3.95 - 40W & 60W circuits
8uF - £4.95 - for correcting 80W MV Chokes
10uF - £5.95 - for correcting 125W MV Chokes
12uF - £6.95 - for specialist MH & Mercury Chokes
16uF - £7.95 - for correcting 250W MV Chokes
25uF - £8.95 - for correcting 400W MV Chokes

240V Mains Plugs:
Tough, black
£1.95p each.

CHOKE HOUSINGS: ABS Plastic:
ABS Micro 87 x 87 x 47 mm 2 glands £3.95
ABS 100 x 100 x 65mm with 2 glands £4.95
ABS 175 x 110 x 75mm with 2 glands £7.95
ABS 190 x 140 x 75mm with 2 glands £10.95 *
* Metal mounting plate for 190x140 - £3.00

Cable glands 12mm £1.50p per pair. (£6.50 per 10)
Cable glands 16mm £1.50p per pair. (£6.50 per 10)
Cable glands 20mm £1.70p per pair. (£7.50 per 10)

CHOKE HOUSINGS: Metal - 20mm knockouts.

SMALL - 4" x 4" x 3" deep - £7.95 each
(100mm x 100m x 75mm approx)

MEDIUM - 6" x 6" x 3" deep - £9.95 each
(150mm x 150mm x 75mm approx)

20mm Cable glands to suit above - £1.50 per pair.

FUSES: 1 inch plug-top type cartridge fuses for U.K. plugs
3A (red) @ £2.99 per 10. - 5A (blue) @ £2.99 per 10.
13A (brown) @ £1.50 per 20 or £2.50 per 50 (bargain price ! )

Lampholders:
ES Plastic (210'C). N/A
ES Ceramic £3.95
ES Brass pendant £9.95
BC 3000E brass £5.95
3-BC brass Robinson £7.95
BC brass batten £5.95
3-BC brass batten £7.95

PHOTOCELL 230 Volts 3A. mini photocell / wires. £13.95.

NEMA photocell heads also available - £9.95 (230V)

12V PHOTOCELL board also available to switch 3A (8W - 40W

FIXINGS: Handy packs.

M4 x 12mm Pan head Machine Screw, Pozidrive, with nuts & washers - Pack of 10 - £0.99

M6 x 300mm Threaded Rods, stainless with Wing-nuts, nuts & washers - Pack of 2 rods with 6 nuts, 4 wing-nuts, 10 washers. - Price £4.95

WATERPROOF connectors:
AQUA-SAFE - 2-piece connector 10A 240V IP68 2 bar rated. In-line pair - Price £12.00

Single parts also available, male or female connectors plus male bulkhead connectors (as fitted to Hawk MV choke units).
Ask for prices.

IGNITORS: for Sodium / Halide Lamps - 100W-400W Univ. £7.95

CROSS-PIECES (lampholder mounting). - With ES lampholder and with or without 10m cable for fitting to your own trapbox or converting a 3-pin BC Skinner trap to take ES Mercury Lamps  VARIOUS LENGTHS available. 25mm x 16mm profile trunking, white plastic.
Std 12" (30cm) with lampholder £5.95 (P&P ask)
12" to 18" (60cm) with lampholder £7.95 (P&P ask)

With 10m cable fitted - add £5.95 (P&P ask)

VANES FOR 40W ACTINIC TUBES: Specially manufactured vane set for the 40W tight-fold U-tube used in many moth traps. These vanes carry the tube and fit into most 18cm-2cm funnels. Can be trimmed to fit other funnel types. (Also available for 25W).
Set includes vanes, all fixings. PRICE £19.95.  P&P £3.95
IF ORDERING WITH OTHER ITEMS ask for a postage quote.

HEATH TRAP UPGRADE sets are also available which contain the vanes, tube and control set (mains or 12V).

LAMPHOLDER ADAPTER: BC-ES. Enables you to run any suitable screw fitting lamps (such as the 20W ES compact actinics) in a normal household lampholder. ALSO: ES-BC available (run BC in a ES holder).
£3.95 each.

12V TIMER MODULES:  Use to control 12V traps and other 12V items up to 10A.  7-day timer, minimum power drain on standby. More accurate than a solar switch.
£9.95 each (Basic module only).