CHOKES: So many types.. M.V. and Actinic Chokes / Ballasts: a selection..........

PARMAR MV 50W 240V £10.95 - £3.00
PARMAR MV 80W 240V £12.95 - £4.00
PARMAR MV 125W 240V £14.95 - £4.00
PARMAR MV 250W 240V £23.95 - £6.00
PARMAR MV 400W 240V £39.95 - £8.00
PARMAR MV 700W 240V £49.95 - £8.00

SCHWABE Actinic 4-8W £4.95 - £1.50
TRIDONIC Actinic 15W £5.95 - £2.00
TRIDONIC Actinic 18-22W £6.95 - £2.50
TRIDONIC Actinic 30-40W £7.95 - £2.50

CARRIAGE: Chokes are heavy !  Carriage charge is in red against each choke. Ask for carriage quote and discounts on multiple orders !  A wide range of other chokes available, Mercury, Metal-Halide, Actinic, Fluorescent, Sodium, etc........

STARTER Holders:
Each: £1.00
With Starter £1.30
Per 10 £8.00
Per 10 with Starter £10

STARTERS: 4-65W
Each:  £0.50
Pack of 10: £2.95

T8 END CAPS:
(Lampholders) 240V
Per Pair: £1.50
Per 10: £6.50

SET - 1 x Starter Holder + 2 x T8 Lampholders
£2.50 per set

TUBE CLIPS: Spring Steel Zinc plated.
¾" for T5 tubes: 45p per pair. £2.00 per 10.
1" for T8 tubes: 50p per pair. £2.00 per 10.
1½" for T12 tubes: £1.00 per pair £5.00 per 10

POWER FACTOR CORRECTION Capacitors:
* * * Reduces power consumption by 30 - 50% * *
250V Series for Mercury Vapour & Fluorescent:
4uF - £2.95 | 6uF - £2.95 - 40W & 60W circuits
8uF - £4.95 - for correcting 80W MV Chokes
10uF - £4.95 - for correcting 125W MV Chokes
12uF - £4.95 - for specialist MH & Mercury Chokes
16uF - £6.95 - for correcting 250W MV Chokes
20uF - £9.95 - for correcting 400W MV Chokes

240V Mains Plugs:
Tough, black
£0.99p each.

SAFETY RCD
30mA trip
BS7071.
Adapter (Left)
or Plug (Right)
£9.95 each

CHOKE HOUSINGS: Aluminium & ABS Plastic:
With Polymide cable glands:
ABS 100 x 100 x 65mm with 2 glands £3.95
ABS 175 x 110 x 75mm with 2 glands £5.95
ABS 190 x 140 x 75mm with 2 glands £6.95

Aluminium AB24 133 x 102 x 64mm + 2 glands £6.95
Aluminium AB31 152 x 102 x 76mm + 2 glands £7.95
Aluminium AB15 203 x 152 x 76mm + 2 glands £9.95

Polymide cable glands 20mm £1 per pair.
Polymide cable glands 16mm 90p per pair.
Polymide cable glands 16mm or 20mm £4.00 per 10.

FUSES: 1 inch plug-top type cartridge fuses for U.K. plugs
3A (red) @ £1.99 per 10. - 5A (blue) @ £1.99 per 10.
13A (brown) @ £1.50 per 20 or £2.50 per 50 (bargain price ! )

ES Lampholders:
Hi-temperature Plastic (210'C).
Tough. Reliable.
Price £2.50 each
£20.00 per 10
£11.25 per 5

PHOTOCELL
230 Volts 5A
Turns ON @ 70 lux. Price: £11.95
Also available IP56 boxed with 3M lead & plug to fit to your existing trap or set - £19.99

FIXINGS: Handy packs.

M4 x 12mm Pan head Machine Screw, Pozidrive, with nuts & washers - Pack of 10 - £0.99

M4 x 20mm Pan head Machine Screw, Pozidrive, with nuts & washers - Pack of 10 - £0.99

M6 x 12mm Hex head Set Screw, with nuts & washers - Pack of 10 - £1.50

M6 x 300mm Threaded Rods, stainless with Wing-nuts, nuts & washers - Pack of 2 rods with 10 nuts, 10 wing-nuts, 10 washers. - Price £1.95

WATERPROOF connectors:
AQUA-SAFE - 2-piece connector 10A 240V IP68 2 bar rated. Price £11.95

IP66 Sockets & Plugs: Clipsal - approved by Lloyds register of Shipping. 13A rated Sockets and matching plugs to IP66. Rainproof, splashproof, water-jet proof if used as pairs.

SOCKET 13A IP66 - £9.95

PLUG 13A IP66 - £8.95
Ask for carriage charges.

CROSS-PIECES (lampholder mounting). - With ES lampholder and with or without 10m cable for fitting to your own trapbox or converting a 3-pin BC Skinner trap to take ES Mercury Lamps  VARIOUS LENGTHS available. 25mm x 16mm profile trunking, white plastic.
Std 12" (30cm) with lampholder £3.95 (£1 P&P) - 12" to 24" (60cm) with lampholder £4.95 (£2 P&P) - 24" to 36" (90cm) with lampholder £5.95 (£3 P&P)

With 10m cable fitted - add £2.95 (incl P&P). - PLEASE QUOTE EXACT LENGTH REQUIRED.

IGNITORS: for Sodium / Halide Lamps - 100W-400W Univ. £7.95